If you are seriously in wood working business then you must surely buy a woodworking router. If such kind of tool is offered to any real wood craftsman then he can create many beautiful designs, sharp edges, create joints, and hollow grooves and anything that you wish.
If you can understand the features of different woodworking routers properly then you can buy right woodworking router for your business. On the other hand, if you end up buying any wrong woodworking router then you will not get the results as per your expectations. Therefore, reading following guidelines is useful while buying any woodworking router.
There are basically two different kinds of woodworking routers-
- Plunge routers
- Fixed base routers
Design of the router actually decides what type of jobs you can get out of it. Therefore, you need to select your tool such that it should be best suited for your purpose. Read the review of one woodworking router on the website http://www.nuttydiy.com/reviews/best-wood-router/ that will give you some idea about the type of router available in the market. It is also a good idea to read the review of any woodworking router that you decide to buy.
Most of the woodworker router consists of an assembly that contains a motor to spin the blade or bit of the router. It also contains a handle to guide the router to guide where the cut to be given. A metal clamping sleeve properly holds the blade in place that is located at the base of the router. The platform of the router can be either a fixed attachment or a base with spring loaded arrangement in case of plunge router.
The motor power ratings can be different like 0.875 HP, 1.5 HP, 2 HP and 3.5 HP and bit sizes are 6 mm, ¼”, 8 mm, 10 mm, 12 mm and ½”. The motor speeds can be 8000 RPM to 30,000 RPM that depends upon motor power rating and router size.
Such kind of router has spring loaded base where you can push the bit into the wood where you want to work. It can also be locked at any specific depth by the operator of the tool. With plunge router you can begin your cut in the middle of the piece instead of from the edges. However, plunge routers are little expensive as compared to fixed base type of routers. Also, such woodworking routers are bit harder to use.
Fixed base Routers
In such kind of routers, you have to fix the depth of its blade before you start using the tool. You cannot adjust this depth when the tool is already running. In order to adjust, you may need to twist the housing of router to either screw or unscrew the router at the base and thus you can raise or lower the bit of the tool. For molding design and edge cuts that need straight line precision this type of router is best suited. As compared to plunge router, this router is lighter and perfect for beginners.